CAREER

HIRING INFORMATION

GDS is looking for the following positions to be filled:

1. GIS SPECIALIST

2. REMOTE SENSING SPECIALIST

Job Description 

·         Perform GIS spatial analysis to meet various application requirements

·         Perform Topological Data Checking on GIS layers

·         Digitizing work using GIS software or CAD software

·         To develop Geospatial Model using graphical spatial modeller

·         Integrating GIS data into Geodatabase software such as PostgreSQL-Postgis

·         SQL Programming for Geometry and Attribute data validation

·         Conduct GNSS data collection

·         To perform LiDAR data editing work using Terasolid software

·         Process Raw LiDAR data and post processing

·         Perform Orthophoto processing

·         Perform review on software capabilities and other geomatic related matters. 

·         Preparation of technical write-up or proposal

·         Prepare technical presentation based on client requirement 

·         Attending meeting, conference and seminar when required 

·         Project report preparation and presentation to client

·         Work in remote area with less supervision

 
Requirements 
·        Master in Geographic Information System (GIS) from a recognized university 
·        Strong analytical and programming skill in solving spatial analysis requirements, data validation and checking  
·        Strong knowledge in using GIS Software such as ArcGIS, QGIS, Global Mapper, etc
·        Experienced in Geodatabase developmet, programming SQL Script using any Database software such as PostgreSQL, Ms-SQL, Oracle, etc.
·        Experienced in LiDAR data processing and ground survey would be an advantage
·        Valid driving license and ability to drive 4WD vehicle (auto & manual) would be an advantage
·        Good leadership skill, ability to communicate well, motivate team member, handle and delegate responsibilities, listen to feedback, and have flexibility to solve problems in ever-changing workplace.
·        Ability  to work overtime, under pressure and ready for outstation work in remote area
·        At least 2 years working experience in related field
·        Fresh graduate with energetic and enthusiastic attitude are encouraged to apply 
 
Job Types: Full-time
Job Description 
·         Perform remote sensing data analysis for various applications such as landuse change detection, flood risk mapping, slope hazard mapping, etc
·         Research on suitability of remote sensing data for specific applications
·         Perform LiDAR data fusion with other remote sensing data (active & passive data)
·         To produce Orthophoto and DSM using Photogrammetry  method
·         Spatial Analysis and Digitizing work using GIS software
·         Develop Geospatial Model using graphical spatial modeller
·         Perform research on software capabilities and other remote sensing/Geomatics related matters. 
·         Research on oblique aerial photography (data acquisition and processing)
·         Conduct GNSS data collection
·         To produce CAD drawing using Autocad or any similar software 
·         To perform LiDAR data editing work using Terasolid software
·         Project report preparation and presentation to client
·         Perform Orthophoto processing
·         Generate 3D model and 3D fly-through animation using LiDAR data and other remote sensing data
·         Preparation of technical write-up or proposal
·         Prepare technical presentation and progress report based on client requirement 
·         Attending meeting, conference and seminar when required
·         Work in remote area with less supervision 
 
 Requirements 
·        Master in Remote Sensing from a recognized university 
·        Strong knowledge in using Remote Sensing and GIS Software such as Erdas Imagine, PCI, QGIS, ArcGIS, Global Mapper, etc
·        Strong analytical and programming skill in solving spatial analysis requirements, GIS data validation and checking  
·        Experienced in LiDAR data processing and ground survey would be an advantage
·        Experienced in operating drone and processing of data that acquired from drone would be an advantage
·        Experienced in programming SQL Script using any Database software such as PostgreSQL and Ms-SQL would be an advantage
·        Valid driving license and ability to drive 4WD vehicle (auto & manual) would be an advantage
·        Ability  to work overtime, under pressure and ready for outstation work in remote area
·        Good leadership skill, ability to communicate well, motivate team member, handle and delegate responsibilities, listen to feedback, and have flexibility to solve problems in ever-changing workplace.
·        At least 2 years working experience in related field
·        Fresh graduate with energetic and enthusiastic attitude are encouraged to apply 
 
Job Types: Full-time

3. LAND SURVEYOR

4. TECHNICAL ASSISTANT

Job Description 
 
·        To establish Base Stations and carry out related ground survey work as required for airborne LiDAR survey job
·        Conduct GNSS data collection including processing 
·        Offset survey data collection and processing 
·        Operate LiDAR system on aircraft
·        Work in remote area with less supervision
·        To produce CAD drawing using Autocad or any similar software 
·        To perform LiDAR data editing work using Terasolid software
·        Project report preparation and presentation to client
·        Process Raw LiDAR data and post processing at project site & HQ 
·        Perform data analysis at project site and HQ 
·        Perform Orthophoto processing at project site and HQ 
·        Perform LiDAR  point cloud finalization 
·        Perform QC on the edited LiDAR data and Orthohoto
·        Perform research on software capabilities and other geomatic related matters. 
·        To request approval from JUPEM and other relevant authorities to conduct  airborne LiDAR survey work
·        Assist in preparation of technical write-up or proposal
·        Prepare technical presentation based on client requirement 
·        Attending meeting, conference and seminar when required 
 
Requirements 
·        Bachelor of Surveying/ Geomatics  Science or Geomatics Engineering from a recognized university 
·        Competency in handling survey equipment especially GPS & Total Station
·        Strong basic survey knowledge especially in datums, projections and geoid model. 
·       Good leadership skill, ability to communicate well, motivate team member, handle and delegate responsibilities, listen to feedback, and have flexibility to solve problems in ever-changing workplace
·        Valid driving license and ability to drive 4WD vehicle (auto & manual) would be an advantage
·        Ability  to work overtime, under pressure and ready for outstation task in remote area
·        At least 2 years working experience in related field
·        Fresh graduate with energetic and enthusiastic attitude are encouraged to apply 
 
Job Type: Full-time 
 Job Description : 
·        To install LiDAR Survey system on a helicopter of airplanes 
·        To operate the LiDAR survey system in-flight during data acquisition mission 
·        System troubleshooting to rectify system failure as and when required 
·        System maintenance work – hardware task including soldering, cable making, metal fabrication, etc. 
·        To keep good maintenance record for cabling and system design (schematic / as build drawing) 
·        To keep track of each components upgraded or installed in Matrix and documented it properly 
·        Liaising with LSI to ensure our system are similar or have same standard as what they have. 
 
Requirement : 
 
·        Diploma/Certificate in Electronic/Electrical/Aviation Engineering or any related fields
·        Relevant background on robotics, manufacturing or aircraft maintenance. 
·        Manual skills for fabrication and assembly instrumentation, building cables and wiring harnesses 
·        Good electronic/electrical troubleshooting skill 
·        Competency in using multimeters, scopes and good soldering skill
·        Basic knowledge on Linux and electronic system would be an advantage  
·        Good hands-on skill on mechanical aptitude 
·        Know how to read schematic / as build drawing 
·        Know how to check signals connection 
·        Valid driving license and ability to drive 4WD vehicle (auto & manual) would be an advantage
·        Ability  to work overtime and ready for outstation work in remote area locally or overseas
 
 
Job Types: Full-time 

5. GEODETIC SPECIALIST

6. ASSISTANT LAND SURVEYOR

 Job Description

·        To conduct analysis on Geoid model

·        To create program for coordinate conversion, datum transformation and map projection

·        To conduct deep analysis for GNSS/INS processing

·        To establish Base Stations and carry out related ground survey work as required for airborne LiDAR survey job  Conduct GNSS data collection including processing

·        Offset survey data collection and processing

·        Work in remote area with less supervision

·        To produce CAD drawing using Autocad or any similar software

·        To perform LiDAR data editing work using Terasolid software

·        Project report preparation and presentation to client

·        Perform Orthophoto processing

·        Perform LiDAR point cloud finalization

·        Perform QC on the edited LiDAR data and Orthohoto

·        Perform research on software capabilities and other Geomatics related matters.

·        Assist in preparation of technical write-up or proposal

·        Prepare technical presentation based on client requirement

·        Attending meeting, conference and seminar when required

Requirements

·        Bachelor of Surveying/Geomatics recognized by RISM and Master of Surveying/Geomatics Engineering

·        Professional survey qualification by RISM is preferred

·        Deep survey knowledge in Geodesy especially in datums, projections and geoid model

·        Advance knowledge in GNNS theory and application

·        Good in handling survey equipment especially GPS & Total Station

·        Good in programming and survey computation

·        Good leadership skill, ability to communicate well, motivate their team, handle and delegate responsibilities, listen to feedback, and have the flexibility to solve problems in an ever-changing workplace

·        Valid driving license and ability to drive 4WD vehicle (auto & manual) would be an advantage

·        Ability to work overtime, under pressure and ready for outstation task in remote area

·        At least 2 years working experience in related field

·        Fresh graduate with energetic and enthusiastic attitude are encouraged to apply

 

Job Type: Full-time

Job Description 
 
·        To establish Base Stations and carry out related ground survey work as required for airborne LiDAR survey job
·        Conduct GNSS data collection including processing 
·        Offset survey data collection and processing 
·        To request approval from relevant authorities to conduct  airborne LiDAR survey work
·        Operate LiDAR system on aircraft during data acquisition mission
·        Work in remote area with less supervision
·        To produce CAD drawing using Autocad or any similar software 
·        To perform LiDAR data editing work using Terasolid softw
 
 
Requirements 
 
·        Diploma in Land Survey/ Geomatics  Science/ Geomatics Engineering from a recognized university 
·        Competency in handling survey equipment especially GPS & Total Station would be an advantage 
·        Strong basic survey knowledge especially in datums, projections and geoid model. 
·        Possess valid driving license and ability to drive 4WD vehicle (auto & manual) would be an advantage
·        Ability  to work overtime, under pressure and ready for outstation task in remote area, locally and overseas
·        At least 2 years working experience in related field
·        Fresh graduate with energetic and enthusiastic attitude are encouraged to apply 
 
Job Type: Full-time 

Please email your Resume to us : admin@grounddatasolutions.com before 15 June 2020